Tuesday, August 7, 2007

Gourmet Kitchen on a Budget: Part Two

In my previous installment, I talked at length on the importance of good knives for the well-equipped kitchen. Today, I'll discuss what I believe to be the second most important must-have: good cookware.

In college and in my pre-marriage days, I cooked with some middle-of-the-road T-Fal cookware. It came in a big (13-piece?) set at Target for the low price of about $60. In hindsight, it cooked fine for the most part, but almost all of it was non-stick, and it didn't heat all that evenly. After a few years of use, the Teflon coating was chipping in places and the enamel outside was scorched and looked awful.

Shortly after our wedding, MLB and I purchased a new set of All-Clad cookware from their Stainless line. When I switched to the All-Clad cookware, I couldn't believe the difference, even over the decent T-Fal set. It heats very evenly, heats very quickly, and when used properly, is nearly as non-stick as the Teflon-coated stuff. Temperature control is more precise, and clean-up is cinch. I found myself cooking better purely due to the improved cookware.

“Wait a second. That sounds a little loony. You’re saying you became a better cook just by using better cookware?”

Absolutely. I’m not sure how I’d set up a test to quantify it (maybe a thermal gradient test or something), but I guarantee the quality stainless steel stuff improved my cooking. There’s no question in my mind that the heat is more even and the temperature control is more precise. An ultra-low simmer is now achievable across the whole pan, where before just the part of the pan directly over the burner was controllable.

“Okay, you’ve established that you’re a fan of All-Clad’s Stainless cookware. Can you be a bit more general?”

Absolutely. Here are some of my basic guidelines:

There’s no question in my mind that stainless steel is where it’s at. Stainless steel is non-reactive to 99.99% of foods, so it won’t stain or discolor like an anodized aluminum pan might. I'd choose to avoid non-stick in most cases (one 12" non-stick frying pan would be okay) because it shouldn't be used for browning, sautéing, or anything hotter than about medium-heat. More on that later. Plus, with shiny stainless steel surfaces, I don't have to worry about scratching all those silly non-stick surfaces with metal utensils like whisks and spatulas.

I’d also choose something that’s relatively heavy. Heavy pans retain heat well and distribute it more evenly than light, thin pans. A copper or aluminum core clad in stainless steel would also be a major plus in this area.

“…clad in stainless steel?” What the heck does that mean?”

Think of a clad pan like a plain turkey sandwich. The two pieces of bread would be stainless steel, and the turkey in the middle would be copper or aluminum. The stainless steel totally surrounds the inner metal. Copper and aluminum have a thermal conductivity (or k value) of five to ten times that of stainless steel, which means that pan will heat more evenly and rapidly than a purely stainless steel pan would. Basically, you’re getting the best of both metals: the conductivity of the inner metal, and the non-reactivity of the stainless steel.

Try to find something that has oven-proof handles. This makes it possible to go directly from the stovetop to the oven and vice-versa. That means no plastic handles! Well, some manufacturers have plastic handles that they say are oven-safe, but I’d still shoot for metal. The drawback to metal handles though, is that they can get pretty warm, especially on the lids. When it comes to attaching the handles, rivets are way better than screws. Quality pots and pans will have big thick rivets holding the handles to the main part of the pan. Because the rivets are deformed strong pieces of metal, they'll never loosen or wear out. Lower quality pieces have handles held on by screws that are more likely to corrode and loosen over time.

“Okay. I know basically what I’m looking for, but those clad stainless sets are pricey! I thought this was going to be a budget deal!”

It is. I’m not saying you need to plunk down a grand for a full set of pots and pans. Most recipes and cooking techniques require only a single pan or two. There's no doubt in my mind that you can get by with just some basic pieces, and here’s what I’d pick, in the order that I'd pick them:

- 12" frying pan - This will probably be your "everyday" pan. With a tight-fitting lid, you can slowly cook risotto, quickly sear a steak, or pan-fry some tilapia fillets. Preheated properly, and with just a tiny (and I mean tiny) bit of fat (like oil or butter), it's nearly non-stick. Make sure you get one with gently sloping sides so that you can easily flip your food. Also try to find one with a gentle radius where the bottom meets the sides of the pan. A nice, gentle radius makes it easier for whisks and spatulas to get in there and move things around.

- 2.5 to 3 quart sauce pan - Again, make sure you get one with a nice, tight-fitting lid. This pan will be absolutely essential when you make any sauces or small batches of soups or pasta. A second handle opposite the main handle is nice for pouring or draining, but it’s really not necessary.

- 5-7 quart casserole - This can be a rather expensive piece, but it'll be able to serve many purposes. It can easily handle big batches of pasta, soup, and with oven-proof handles, can even be used as a make-shift roasting pan and casserole dish.

"Okay, so those are the three critical pieces. What about any others?"

To be honest, the other pieces you'll get with a set are likely just slight variations of the above three pieces. Some are bigger, some are smaller, some are taller, and some are wider. If you find yourself saying "Gee, this would work a bit better if this pot were a bit wider," pick up something that fits the bill. You may be happy with just those three pieces.

Personally, I've got several frying pans, and several other pans, but I nearly always reach for the above three pieces. Seriously.

"Okay, all these pans you've mentioned so far are not non-stick. I'm scared to fry an egg on anything but Teflon!"

I understand. If you've tried to cook something high in protein (like an egg or cheese) on a cheap standard pan, it's likely that it stuck. So, now you're apt to use Teflon as your crutch. Fine. I'll agree that there are some foods that are a bit easier (and less nerve-wracking) to cook on Teflon. If you absolutely must buy a non-stick pan, make sure you look for certain characteristics.

First, make sure that the Teflon coating is very smooth. There are a lot of non-stick pans out there that are ridged or bumpy. I don't understand why. If you want something to slide around easily, why would you make the pan bumpy, and add surface area? Second, make sure that the pan is still high-quality and heavy. Even heating is still critical with a non-stick pan. Finally, try to find a pan that uses the same lid as the pans you already have. Lids take up lots of space, so the more they can do double-duty, the better.

"I've completed my shopping list and I think I'm ready to buy. But, I'm a little queasy about maintenance and cleanup. Won't stainless pans be a pain?"

Not at all. Even with the worst baked-on gunk, my All-Clad stuff cleans up easily. You've just got to remember to get it clean in a reasonable amount of time. If you leave a pan sit overnight with burnt crusties on it, it'll be much tougher to clean that if you just cleaned it right away.

Most of the time, my pans clean up with just soap and water and a sponge. If it's tougher gunk than that, it may have to soak in soapy water for a couple of hours. Only occasionally do I use a fine powder cleanser to get the really stubborn stuff. Check with the manufacturer of the pans you choose, but they're likely dishwasher safe, too. That's great for when you're really lazy like me.

"Throughout this whole post, you've been pretty anti-non-stick. How come?"

A couple reasons. First, aside from crepes it's almost never necessary, and I don't want to have a ton of pans cluttering up my cabinets. Second, Teflon gives off toxic gasses at high temperatures. This outgassing is fatal to pet birds (not that I have one) and can cause "polymer fume fever" or "Teflon flu" in people. That's why you should never do high temperature cooking, like sautéing or broiling in a coated pan. Third, it limits your utensil usage. Teflon can be easily gouged and scratched with metal utensils, and sometimes a wire whisk is the best way to get the tasty bits off the bottom on the pan. I figure that the less I have to concentrate on not scratching my pan, the more I can concentrate on the food.

So, if you're still a non-stick user (and I am too, occasionally), just make sure you never use range heat higher than medium, never use metal utensils, and never broil in your pans. If you're okay with that, they should last a long time.

There are certainly places to save money when stocking a kitchen, but I don't think cookware is the place to do it. Besides, when you purchase quality cookware, it should last a lifetime, and I fully expect to pass my All-Clad set down to my children eventually. There's no doubt that high-quality cookware is expensive, but to me, the All-Clad Stainless cookware is worth every penny.

YFNN

Monday, August 6, 2007

Gourmet Kitchen on a Budget: Part One

I do a pretty significant amount of cooking at the YFNN homestead, and while I'm certainly not a trained expert chef, I'm pretty darn skilled. When we have folks over for dinner, I'm occasionally asked why I use the equipment that I do. Most are pretty shocked to find out that you don't really need to spend a lot of money for a well-equipped and safe kitchen. So, I thought I'd put together a couple of posts about the subject. Basically, of I were going to restock my kitchen from scratch within a reasonable budget, what would I get and why?

I'll start with my favorite equipment: knives.

Knives are an absolutely critical component to an efficiently-equipped kitchen. The important thing here is to buy decent quality, sharp knives, for a couple of reasons. First and foremost is safety. Cheap knives and more importantly, dull knives are a safety hazard. Yes, that's right, dull knives are much, much more dangerous than keen, sharp ones. Here's the reason: Say you want to slice an apple up for a Waldorf salad. When you use a dull, cheap knife, you have to use much, much more force to cut through the skin of the apple (or tomato, or whatever). All that extra force has the potential to cause a slip and then the tip of your finger can decide to make a swift departure. With a sharp knife, you just slice right through.

The second reason to buy some quality knives is longevity. Cheaper knives are typically made from carbon steel or stainless steel and wooden handles.

"Great! Stainless steel is really resistant to rust. That's perfect for a knife!"

Not quite. First of all, it's important to remember that it's stain-less steel, not stain-free steel. Improperly handled, stainless steel with certainly corrode. Second, regular stainless steel isn't very hard as far as metals go. Because of this, it doesn't keep an edge well, and as stated before, a dull knife is frustrating and dangerous. Avoid regular stainless steel knives. They're typically labeled with "18-8" or "surgical stainless steel."

"Okay, carbon steel it is. I'll have to be careful about rust, but at least it'll stay sharp."

Well, high-carbon steel is a good knife material, but it's certainly not stain resistant. High-carbon steel knives will rust, and well-used blades will turn black, even with good care. With the way I tend to leave knives in the sink and such, that's not a good choice either.

So what's left? Well, it's kind of a combination of the two. Good quality knives are typically made from high-carbon stainless steel. Most companies have their own proprietary blend of steel that they use. They keep a nice sharp edge, and they're very stain resistant. So, keep an eye out for "high-carbon stainless steel" construction.

“Okay, so what about the handles?”

Most low-end and even some very high-end knives come with wooden handles. High-end wooden handles are comfortable and luxurious, but wood tends to harbor bacteria and other creepy-crawlies if it's not perfectly maintained. Plus, if they get wet (or are run through the dishwasher), the wood can split and deteriorate. Other options are stainless steel or plastic composites. In my opinion, either is a fine choice. I personally like the warmer, softer touch of the plastic handles.

"Okay, so I'm looking for high-carbon stainless steel knives with plastic or metal handles..."

Hold on, there's more to the story. You've also got to think about knife construction. The construction method of the knife defines its balance and heft, both of which are important to ease of use and comfort. Most cheaper knives are stamped, or blocked. Basically, the blades (and the inner part of the handle) are stamped from a single sheet of metal, much like cutting cookies from cookie dough. The cut-out shapes are then ground for the edge and the handles are riveted or glued to the handle portion (or tang). This produces a lightweight knife that usually isn't well balanced. A better way to manufacture a knife is to forge it. Think of a medieval blacksmith hammering a sword out of red-hot metal on an anvil. That's essentially how a forged knife is made. Well, except nowadays they use big heavy presses and machines, but you get the idea. This method of manufacture allows the knife to have a bolster (a thick section between the blade and handle), and a more pronounced spine. This is good because a stronger spine means less flexing and bending, and the bolster adds to the heft and feel of the knife while helping to really balance it.

"High-carbon stainless steel, plastic or metal handles, forged blades. Got it. How many of these higher-priced knives do I need?"

Actually, not too many. You could go out and buy a set of knives that would have everything from a tiny paring knife to a huge 10" meat cleaver, but most wouldn't be necessary. It would be much more cost effective to pick up a few essential pieces right away and add to your collection as needed.

Here's what I think is essential:

- A good chef's knife - A decent chef's knife is my #1 tool in the kitchen and it's the knife I'll reach for nine times out of ten. It chops, it dices, it'll slice when necessary, and it'll even strike (like for cutting through bones) when it has to. It's the do-all knife. An eight to ten inch chef's knife is absolutely critical to a properly equipped kitchen.

- A paring knife - A paring knife is perfect for peeling vegetables, making decorative cuts, and for more detailed work. It'd be pretty stupid to try to peel an apple with any other knife.

- A slicer of some sort - Slicers have long, thin blades for less drag, and may or may not be serrated (toothed). They're perfect for slicing soft bread, a big pork tenderloin, or nearly anything else. If I had to pick just one, I'd pick a long (ten inches or longer) serrated bread knife. Bread knives can cut more than just bread, you know.

Everything else is certainly nice to have (I love my Japanese Santoku knife), but are not really necessary. Those three knives will get just about any job done.

"So, FNN, what do you personally use?"

I personally have a full set of Wusthof Grand Prix II knives, and I wouldn't trade them for the world. I absolutely love, love, love them. If it were safe and socially-acceptable to make out with cooking equipment, I'd be more than happy to smooch these knives like crazy. They're rather expensive, but certainly worth it to me.

Other good choices would be this design from Farberware or any Henckels knife.

"Ewww. You are creepy and disgusting, and you're gonna get hurt! Let's move on. So, how do I care for and maintain these new beauties?"

Well, it's really not that tough, but there are a couple of critical things to remember. First, use a good cutting board. I refuse to use anything but the plastic ones, for a couple of reasons. First, is safety. I absolutely hate glass cutting boards. Hate, hate, hate them. The food slides around, creating a safety hazard, and the hard surface dulls a knife super-fast. Plus, you have to worry about them breaking, and I don't particularly care for glass shards near my food. On the plus side though, they're dishwasher safe, maintenance free, and they don't harbor bacteria.

Then, there's your grandmother's favorite wooden cutting board. Sure, it's easy on the knife and the food, and those butcher-block boards sure are pretty, but that's about all it's got going for it. They can't be put in the dishwasher because they'll split and age, and they have to be oiled and sanded now and again so they stay nice and don't dry out. Plus, since they lots of little ridges and valleys and holes and can't be put through the dishwasher, they're great at storing little nasties like bacteria and such. Yuck. Add the hefty price tag for a quality wooden cutting board and you've got a real loser on your hands. If you absolutely have got to have a wooden cutting board, please only cut foods you intend to eat raw, like vegetables or fruits. No raw proteins like fish, meat, or poultry!

Nope, as far as cutting boards go, the only choice for me is plastic. It's cheap, durable, sanitary, and easy to maintain because you can just pop 'em in the dishwasher. My favorite cutting board is a big, thick one about the size of a large cookie sheet. It's even got a juice groove running the perimeter so that when I slice up a pineapple or a perfectly-cooked pork tenderloin I don't get juice all over the counter. Plus, it's so inexpensive that when it gets really hacked up, I can get another one for only a couple of bucks.

"Okay, you've digressed again. Can we get back to maintenance, please?"

Yeah, sorry. Okay, so as you use your knives, they eventually start to dull. Basically, your sharp edge becomes slightly bent on the microscopic level. However, all is not lost; you can fix most of the problem by using a steel before you use your knives.

"A steel? Didn't we already cover metallurgy?"

Not that kind of steel. A steel is that "sharpening stick" that makes that great "zzziiiiinnggg!" sound when you move your knife across it. It basically straightens out all the tiny bends that can create a dull knife. It can be a bit tricky to use at first, but this video should help. I use my steel right before I use any of my knives. It only takes a few seconds, and I love the way it makes that awesome ninja-sword zing sound.

Since a steel just straightens the knife's edge and doesn't really remove any metal when you use it, there will come a day when a steel just won't get the job done and you'll have to have your knife sharpened. Please, please, please don't use one of those home sharpening gizmos or try to do it yourself at home on your garage grinder. Sharpening a knife correctly is a complex dance of angles, pressure, materials, and skill and should only be done by a professional. It only costs a couple bucks per knife and if you're using your steel properly, it shouldn't have to be done more than once every couple of years. There's likely a professional sharpener near you, and if not, many manufacturers will allow you to send the knives back to them and they'll sharpen them.

Finally, don't put your knives in the dishwasher. They'll just bang around and hit other knives, the racks, plates and who knows what else. The blades will be duller than a butterknife in no time, and your handles will not appreciate the steam and dry heat, especially if they're wooden. Take a few minutes after you're done cooking and wash and dry them by hand.

So, that's my take on knives. I know this post was lengthy, but I really think these are the most important tools in the kitchen.

Finally, when you get some favorite quality knives, don't be afraid to give 'em a kiss now and then. They deserve it.

YFNN

Wednesday, April 18, 2007

The Itch to Learn

Okay, so it's been almost a week since I wrote a post here. Where have I been? Why haven't I written? Frankly, it's not really any of your darn business, but it's mostly because I'm a lazy oaf. I've been busy with work, the motorcycle, and lots and lots of unadulterated, self-indulgent laziness. Regardless...

The last 59 months have officially been longest stretch of my life away from an educational facility. Be it college, high school, or kindergarten, I've never been so far removed from schooling. Add that to the fact that my little brother just graduated from college, my little sister will be receiving her Master's degree in a short couple of weeks, and my mother is nearing completion of her Doctorate degree, and I'm starting to feel like the most uneducated moron to don the family name.

So what does this actually mean? It means that I've got the itch to do something educational. Likely, that'll mean my getting my MBA.

I'm fortunate in that TCFWIW will pay for a good portion of my schooling, if I so choose. They probably won't cover the entire bill, but anything is better than nothing. In fact, they'll even foot the bill up-front, which seems to be a bit of a rarity.

Also, time is something that is now available to me, for the most part. I've settled into my position at work a little better, so the hours are shorter, MLB's and my wedding is over and done with, and the household in general is pretty stablized.

It seems the stars are aligning for YFNN's higher education. I'll keep you informed.

YFNN

Thursday, April 12, 2007

More RD250 Progress

I've spent the last couple nights working hard on the restoration of my 1975 Yamaha RD250 (NOT the bike at right). I've taken what seems like a couple dozen parts to TCFWIW to perform some restorative work on them.

The majority of the parts are steel, and the black paint on them has weathered off long, long ago. Due to the paint's slow disappearing act, rust has decided to show itself, sometimes in large, destructive amounts. Fortunately, like I said, most of the parts are steel, so repair is not that difficult.

So, I loaded up the family truckster with some parts, some tape, some spray automotive primer, and some Rust-Oleum Rust Reformer and headed to my place of employment.

I'm lucky to have place like I do to perform this kind of work. The company for which I work (TCFWIW) used to have full-scale manufacturing capability under its expansive roofs, but as of late 2004, it's moved on. But, the large and well-equipped model shop has remained intact. Since the place is pretty lenient about after-hours work (especially if you're friends with the facility manager), I've got a full shop at my disposal whenever I'd like.

When I got to work, I let the guard know I was going to be there for a couple hours and toted my stuff inside. I powered up one of our solvent baths and made short work of all the grease, oil, and grime that had built up on the parts over the years. The swingarm was the worst. because of the drive chain, I'm sure.

Once that was completed, and the parts were thoroughly dried with compressed air, I fired up one of our media-blasting cabinets and went to work on the parts. Because the media and the through-wall gloves were recently replaced, getting rid of the rust and old paint was a comfortable and easy task. As I finished cleaning each part, I made sure it was dust-free and hung it in our paint booth. Some automotive primer did a great job covering the bare metal. In the places where the sandblaster couldn't remove some of the rust, the part was hit with some Rust-Oleum Rust Reformer (which is good stuff, by the way).

A couple of the parts had some pretty severe rust damage, so I had to fire up the welder to add some metal to them and then reshape them. Fortunately, that was pretty easy, and I got them cleaned and primed as well.

I left the parts hang and cure all night, and they should be ready for another coat this evening. Soon after, I'll hit them with some satin black and some clearcoat and they should look good as new. Heck, even in just primer, they look pretty darn good.

I've still got to find a place to blast and powdercoat the frame, though. unfortunately, all of the cabinets at work are too small to fit the frame, and I'm not going to make a mess of the backyard with an external blaster. Besides, I'd rather have the frame powdercoated, so I've got no issues paying someone to do it.

I also recently received the new (well, undamaged) steering stem and triple clamps, to replace my damaged ones. That's a headache lifted. I thought for sure that I was going to have a really difficult (and expensive) time figuring out how to replace the stripped threads on the main stem. I did a lot of swearing when I found that lovely surprise.

All in all, things are cleaning up pretty well. Once the frame is painted, I'm pretty much ready to start reassembling.

Once the paintwork is done, it's time to order a few new parts!

YFNN

Monday, April 9, 2007

Dumb Things I Do All the Time

After reading a post on a personal finance blog about dumb things the author does on occasion, I felt rather inspired to create my own list. But, I'm not going to limit mine to just personal finance, mostly for your entertainment. Now, I'm a pretty smart guy. I got good grades, I've got an above average IQ, I excel at most things academic, but I still do some REALLY dumb things on a daily basis. Really dumb. Here's a short list.

1) Hit the snooze alarm about 6 times every morning.
My alarm goes off about an hour before I really need to get up. Every night, I think that I'm going to get up when the alarm goes off the first time and take my time getting ready and enjoy the morning. Does it ever happen? Of course not. I hit that snooze button every nine minutes until I'm 30 minutes away from having to leave. The real kicker is that I'm sure that hour of intermittent dozing does absolutely nothing for my rest, and it drives MLB crazy. Yet, every day it continues. Dumb.

2) Put off doing laundry until the absolute last possible day. My laundry hamper typically overflows onto the floor several days before I decide it's time to do laundry. What this means is that when I decide to do laundry, it ends up being an all-day chore, and I hate doing laundry. It makes for a miserable day. I'm sure it'd be much less painful for me to just do a load or two every couple of days, rather than all at once, but I never do. In fact, I've even gone so far as to buy new underwear so I could put off laundry a couple more days. Also dumb.

3) Buy a soda for the drive home.
I know it's expensive, I know it's a poor choice, and I know it's intentionally marketed this way, but I always do it. It never fails that when I go to the grocery store (or Target, or Lowe's), I'll pick up a bottle of soda on my way through the check-out lane. Why? Well, because I'm thirsty. Why can't I wait the four or five minutes until I'm home and get a drink of water? Because I'm dumb. Those check-out lane coolers get me nearly every time.

4) When working in the garage, place a tool down someplace unusual and think "I'll remember where I put that because it's an unusual place for it."
For example: If I'm underneath the car, I'll place the ratchet on top of one of the tires, rather than back in the toolbox or on the floor next to me. Then, when I'm ready to use it again, I spend ten minutes trying to figure out where the heck I put it. Or, I'll put the notes for the motorcycle restoration in with the sandpaper, thinking "I'll remember that," and then waste 45 minutes later in the day. Dumb.

5) Leave my cellphone at work.
I don't get very good reception at work, so I typically leave my phone charging on my desk all day. As I leave, I'll bet four out of five workdays, I leave my cellphone in my office. Usually, I'll remember as I get out to my car and have to go back in the building, unlock my office, and retrieve the phone. Somedays, I forget until I get home. I leave it there on my desk, just charging away 80% of the time. Dumb.

So, that's a good start. Maybe now that I've put these dumb things into writing I'm stop doing them. Not likely, but maybe.

YFNN

Thursday, April 5, 2007

S-S-Smoking!

I'm no stranger to mechanical things, especially vehicles. I've spent a good portion of my life lying on my back on a piece of cardboard on concrete. I know the difference between a flat-tappet and hydraulic roller cam, and I think my fingernails are permanently grimy. I was the president of the Purdue Automotive Performance Association in my college days (back when it was about good friends and fast cars, NOT the bling-bling competition it is now), and have helped to build more than a handful of road-going rockets. I even spent a portion of my career with a professional race team, building racecars and chasing horsepower. It's pretty safe to say that if it's got an engine, I'll like it.

Last fall, I bought an old motorcycle as a project for super-cheap. It's a 1975 Yahama RD250B, US model. When I picked it up, it was pretty beat up, rusty, and older than I was. It's tiny by today's motorcycle standards and it sounds like pissed-off weedwhacker on steroids. But, it was so darned cool and with only 2000 original miles, I just had to put some wrenches to it.

However, it's provided me with some challenges so far, mainly because it's very different from what I'm used to working on. First, since it's older than I am, it's carbureted and I'm a fuel injection guy. I'm more comfortable adjusting injector pulse widths than I am changing jets. Now don't get me wrong, I fully understand how carbs work and how to adjust them, it's just not something that I've ever had to do.

Second, this bike is a two-stroke. A smoker. It's a high-revving, oil-injected, cam-less wonder, which is also new to me. Running down the road, it spews healthy blue smoke out the tailpipes and sounds absolutely vicious. Apart from my weedwhacker, I've never touched a two-stroke engine. I'm most amped about this aspect. There's just something completely appealing about a loud, fast, polluting, smoking, relatively unsafe, 30-year old, rolling piece of history. It's just so, um, irresponsible. I absolutely love it.

Third, it's a serious restoration project. I'm not a restoration guy. I'm more a modern-day, horsepower-building, racecar guy. This bike needed to be stripped to the frame and completely redone. That is very different from what I'm used to doing.

So, it's definitely going to be a challenge.

As of today, the bike has been completed stripped down to the frame, and the frame itself is ready to be sand-blasted and painted. I meticulously documented and photographed every part and bolt that came off, so I know exactly how it's supposed to go back on.
I've measured every single fastener that has come off the bike and have kept a log of their location, thread size and length, so that they can be replaced with new ones. I've kept a notebook with more notes that I care to remember, and have lots of labels all over every wiring harness and connectors.

It's going to take me a while, and I'm sure I'm make some bonehead mistakes, but so far, I'm having a blast working on it.

YFNN

Wednesday, April 4, 2007

New Graduates and Focusing on Finances, Part Five - The Final One!


Finally, the last two foci on my list! I apologize for the long delay; the weather here has been beautiful lately, and I spent a lot of time in the garage putzing and working on the '75 Yamaha. I even took a half-day of vacation on Monday so that I could best use the great weather and continue my progress on the restoration. More on that later. Regardless, here's #9 and #10!

Focus #9: Create and maintain a budget.
This document is going to be your rock. It will guide you, help you make good, sound decisions, and keep you focused on your financial goals. It will keep you grounded and set you free at the same time.

It is absolutely imperative that you learn to work with a household budget. There's lots of good websites out there to help you get started, but here are my main points:

1) Know where you money is going. Track each dollar that you spend. You'll quickly realize where the leaks in your spending are, and where you can save some money. Once you know where it's going, you can make better decisions regarding where it should be going.
2) Give each dollar a job. Make sure that each dollar you receive in income is given a job. Make sure each income dollar is either put towards an expense, saved, or invested. Once each dollar has a task to perform, it's much more difficult to waste them. Idle dollars are easily blown on frivolous things.
3) Most importantly, spend less than you earn. That is the ONLY way to get ahead. If you're consistently spending more money than you have coming in, you're in a downward spiral into financial disaster.

I used to have a very elaborate spreadsheet that performed all the calculations, did all the tracking, and reminded me of bills. But, it got to be very big and clumsy. Now, I use a small program called YNAB Pro (available at www.youneedabudget.com). It works beautifully.

Focus #10: The time to invest is now!
Compound interest is a beautiful thing. The earlier you start investing, the more time you have for it to work for you. More than any one mutual fund or stock selection, the age you start investing will determine how much wealth you actually build. This may be difficult for some to grasp, so here's a real-world illustration:

Employee A, we'll call him Dave, starts putting away $100 a month when he's 22 years old, right after he graduates. Dave's money grows at a conservative 8% a year, and after ten years on his 32nd birthday, he decides to stop contributing and just let the money grow. Employee B, we'll call him Phil, graduates at age 22 but waits until he's 32 to start investing for retirement. He sets aside the same $100 a month, gets the same 8% return, but continues investing until he's 64 years old. So, who's got more money at retirement?

Dave does. When they both retire at 64, Dave will have $234,600 and Phil will only have $177,400. Even after only contributing 1/3 of the money that Phil did, Dave's way ahead. If Dave had just continued to contribute the same measly $100 a month until 64, he'd have $412,000! That's over $175,000 more than Phil, just by starting ten years earlier.

The lesson here is to start saving early!

To review my Ten Financial Foci:

Focus #1: Get a good, low-fee checking account and know how it works.
Focus #2: Use direct-deposit.
Focus #3: Get a high-interest savings account.
Focus #4: Start an emergency fund and feed it automatically.
Focus #5: Don't fall into the lifestyle trap.
Focus #6: Ditch your debt.
Focus #7: Make sure you're covered.
Focus #8: Take inventory.
Focus #9: Create and maintain a budget.
Focus #10: The time to invest is now.

I hope the foci I outlined over the last couple days have been insightful and inspiring to new graduates or future graduates. Getting a focus on your finances now, when you're still young is immensely beneficial later on. So, pass these lessons on to any graduates you might know!

YFNN